PZU-6-10kV-GB-NG

The device is used on overhead power lines with a voltage of 6–20 kV. It is installed on pin and support insulators with head wire fastening on suspension, end and branch power line support towers.
Insulator SHSK-12.5-20-2 (version 2-3) is performed with both head and side wire binding. The device is prefabricated, consisting of a solid hood and two corrugated sleeves. It is mounted on overhead power line wires by means of the inner fastening clips ZMI-2.

It is used on insulators of the following types SHF-10; SHF-20; SHF-20 UO; SHS-10; SHS-20; SHTIZ-10V; SHTIZ-20V; SHS-10ED; SHST-10ED; SHS-20UD; SHST-20UD; SHTIZ 10; OLF; SHPU-20-A; SHPU-10 and their modifications and analogs.

Product features

Voltage class of overhead lines: 6–20 kV

Overall dimensions of the device (mm):
1481 x 146 x 117

Windy area, icy area: I–VII

Climatic version execution:
(NF) - moderately cold climate.

Weight +/- 10% (kg): 0.6

Kit composition:
Hood – 1 pc.;
Corrugated sleeve – 2 pcs.;
Fastening means (clamp) – 6 pcs.;
Operation manual – 1 pc. per batch.

Installation time (min): up to 1

PZU-6-10kV-GB-NG

Advantages PZU-6-10kV-GB-NG

The design of the device allows installation on 6–20 kV overhead lines from the ground, without voltage removal, by means of an insulating rod.

The one-piece cast hood ensures the reliability of the structure – deformation and “falling apart” of the BPD is excluded.

The flexibility of the corrugated sleeves allows the device to be installed both on straight and turning sections, as well as in places where the wire is double-fastened.

The transportation costs are significantly reduced due to the small size of the disassembled device.

Pre-assembled packaging, quick installation, lightweight and compact size.

Review and installation of PZU-6-10kV-GB-NG

Дистанционный монтаж PZU-6-10kV-GB-NG монтажной штангой