PZU-6-10kV-ML-2-NG

The device is used on overhead power lines with a voltage of 6–20 kV to protect birds from electric shock. It is installed on pin insulators with side wire binding, including double fastening on suspension, end and branch power line support towers. The device is prefabricated, consisting of a solid hood and two corrugated sleeves. It is mounted on overhead power line wires by means of the inner fastening clamps ZMI-2.

It is used on insulators of the following types ShF-10, ShF-20, ShS-10, ShS-20, ShTIZ-10V, ShTIZ-20V, ShP-10, LShP-10, ShP-20, LShP-20 and their modifications and analogues.

Product features

Voltage class of overhead lines: 6–20 kV

Overall dimensions of the device (mm):
1424 x 155 x 141

Windy area, icy area: I–VII

Climatic version execution:
(NF) - moderately cold climate.

Weight +/- 10% (kg): 0.56

Kit composition:
Hood - 1 pc.;
Corrugated sleeve – 2 pcs.;
Fastening means (clips) – 6 pcs.;
Operation manual – 1 pc. per batch.

Installation time (min): up to 1

PZU-6-10kV-ML-2-NG

Advantages PZU-6-10kV-ML-2-NG

Design of the device allows installation on 6–20 kV overhead lines from the ground, without voltage removal, by means of an insulating rod.

One-piece cast hood ensures the reliability of the structure – deformation and “falling apart” of the BPD is excluded.

Flexibility of the corrugated sleeves allows the device to be
installed both on straight and turning sections, as well as in places where the wire is double-fastened.

The transportation costs are significantly reduced due to the small size of the disassembled device.

Fasteners (ZMI-2 clamps) are installed inside the corrugated hose, what speeds up installation of the device considerably and allows to perform the installation process by means of an insulating rod

Pre-assembled packaging, quick installation, lightweight and compact size.

Review and installation of PZU-6-10kV-ML-2-NG

Дистанционный монтаж PZU-6-10kV-ML-2-NG монтажной штангой