Phone
WhatsApp
Telegram
Продолжая использовать наш сайт, вы даете согласие на обработку файлов cookie, пользовательских данных (сведения о местоположении; тип и версия ОС; тип и версия Браузера; тип устройства и разрешение его экрана; источник откуда пришел на сайт пользователь; с какого сайта или по какой рекламе; язык ОС и Браузера; какие страницы открывает и на какие кнопки нажимает пользователь; ip-адрес) в целях функционирования сайта, проведения ретаргетинга и проведения статистических исследований и обзоров. Если вы не хотите, чтобы ваши данные обрабатывались, покиньте сайт.
Хорошо
 

PZU-6-10kV-NB-NG

The device is used on overhead power lines with a voltage of 6–20 kV and is installed on tension clamps.
The device is assembled and consists of an insulating body with an anti-adhesion comb and two corrugated sleeves. It is fastened to the overhead line wire using internal clips ZMI-2.

Type of tension clamps: NB-2-6, NB-2-6A, NB-60/11-16, NZ-60/11-17, NKK-60/4-10, NKK-120/11-14
and their analogues.
Product features
Voltage class of overhead lines: 6–20 kV

Overall dimensions of the device (mm):
1370 x 100 x 690

Windy area, icy area: I–VII

Climatic version execution:
(NF) - moderately cold climate.

Weight +/- 10% (kg): 0.95

Kit composition:
Case – 1 pc.;
Corrugated sleeve – 2 pcs.;
Fastening means (clip) – 6 pcs.;
Operating manual – 1 pc. per batch.

Installation time (min): up to 2
PZU-6-10kV-NB-NG
Advantages PZU-6-10kV-NB-NG
  • The case isolates the tension clamp.

  • The anti-adhesion comb covers the technological slot in the protective case.

  • The length of the spokes can be adjusted by cutting them.

  • Easy installation due to ZMI-2 clips. The clips are installed inside the corrugated sleeve.

  • The flexibility of the corrugated sleeves allows the device to be installed on both straight and turning sections.

  • The compactness of the product when disassembled allows for reduced transportation costs.
Review and installation of PZU-6-10kV-NB-NG